IntegraSpec
 
 

Architectural Details
 
 

Typical IntegraSpec Wall Sections

 

 
 
Figure 1(dwg):   Typical IntegraSpec Wall to Roof Line, with Floor Ledger bolted onto wall with Flange Bolts.
Figure 2(dwg):   Typical IntegraSpec Wall to Roof Line, with Floor Ledger bolted onto wall with Flange Bolts & Stone / Brick Ledge Panel.
Figure 3(dwg):   Typical IntegraSpec Wall to Roof Line, with Floor Joist imbedded in inside Concrete Wall.
Figure 4(dwg):   Typical IntegraSpec Wall to Roof Line w/ 1st, 2nd and 3rd Floor.
Figure 5(dwg):   Typical IntegraSpec Wall with Taper Top Panel @ Floor Ledge / Continuous Concrete Wall to Roof Line.
Figure 6(dwg):   Typical IntegraSpec Wall with 4 inch (10 cm) Brick Ledge & Concrete Wall to Roof Line.
Figure 7(dwg):  

Typical IntegraSpec Wall with Double 4 inch (10 cm) Brick Ledge Panel for Floor and Brick Support.  Concrete Wall to Roof Line.

Figure 8(dwg):   Typical IntegraSpec Wall to Roof Line, with Floor Ledger bolted onto wall with Flange Bolts;  Taper Top Panel at Stone / Brick Ledge.
Figure 9(dwg):   Typical IntegraSpec Wall with Hollow Core Slab / Taper Top Panel @ Floor Ledge / Continuous Concrete Wall to Roof Line.
Figure 10(dwg):   Typical IntegraSpec Wall to Roof Line, with Parapet and Structural Concrete Slab / Floor / Roof.
Figure 11(dwg):   Typical IntegraSpec Wall to Roof Line, with Parapet and Pre-cast Hollow Core Concrete Floor Slab.
Figure 12(dwg):   Typical IntegraSpec Wall to Roof Line, with Parapet and Engineered Concrete Floor System.
Figure 12-b(dwg):   Typical IntegraSpec Wall to Roof Line, with Parapet and Engineered Concrete Floor System.
Figure 13(dwg):   Typical IntegraSpec Wall with Exposed Concrete Face (ECF) for Non Combustible Construction.
Figure 14(dwg):   Typical IntegraSpec Wall with Floor/Brick/Stone Ledge panels & Conventional walls above.
Figure 14-a(dwg):   Typical IntegraSpec Wall with 4" (10 CM) Brickledge Panel Supporting Floor.
Figure 14-b(dwg):   Typical IntegraSpec Wall with 4" (10 CM) Brickledge Panel Supporting Floor and Exterior Brick (Stone).
Figure 14-c(dwg):   Maximum Floor Spans for Brickledge Panel Stirrup and Spacing.
Figure 15(dwg):   Typical IntegraSpec Wall with Floor/Brick/Stone Ledge panels & Conventional walls above.
Figure 16(dwg):   Typical IntegraSpec Wall with Taper Top Panel & Exposed Concrete Face (ECF) @ Floor & Conventional walls above.
Figure 17(dwg):   Typical IntegraSpec Wall w/ Insulated Concrete Balcony.
Figure 18(dwg):   Typical IntegraSpec Wall to Roof Line, with Structural Concrete Slab, Floor or Roof.